- 16 Amp DC switching capacity
- Low hysteresis
- Adjustable temperature
- Change-over contact
- DIN rail mountable
The ET 011 is an electronic thermostat designed to switch the potentially high loads (amps) of DC 24 V operated equipment. With its potential-free change-over contact, a wide variety of products can be switched, i.e. heating/cooling equipment as well as signal devices.
A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.
Technical Data
| Switching difference (hysteresis) |
Approx. 5.4°F (3K) |
| Sensor element |
PTC |
| Contact type |
Change-over |
| Contact resistance |
< 10mOhm |
| Service life |
> 100,000 cycles |
| Max. switching capacity |
16 A @ 28 VDC (resistive load) |
| EMI/EMC compliance |
EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection |
5-pole terminal for AWG 14 max. (2.5 mm²) |
| Mounting |
Clip for 35mm DIN rail (EN 50022) |
| Housing |
Plastic, UL 94V-0 |
| Dimensions |
2.6 x 2.0x 1.8" (67 x 50 x 46 mm) |
| Weight |
Approx. 2.8 oz. (80 g) |
| Mounting position |
Vertical |
| Operating temperature |
32 to 140°F (0 to 60°C) |
| Storage temperature |
-49 to 176 °F (-45 to 80 °C) |
| Protection type |
IP20 |
| Agency Approvals |
- |
| Part No. |
Operating Voltage |
Setting range |
| 01190.0-00 |
24 VDC (20-28 VDC) |
0 to 60 °C |
| 01190.0-01 |
24 VDC (20-28 VDC) |
32 to 140 °F |
